Contact us to place an order - Product lead Time 4-6 weeks
5131133 – Fluke 726 Precision Multifunction Process Calibrator -FLUKE
Description
Category: Process Calibrator
Product Name: Fluke 726 Precision Multifunction Process Calibrator
Brand: FLUKE
Packing Condition: Packed
Additional information
| Weight | 1.625 kg |
|---|---|
| CATEGORY | |
| RANGE | Multi |
| VOLTAGE | 30 V |
| CURRENT | 24 mA |
| FREQUENCY | 1.00 to 15.00 kHz |
| RESISTANCE | 4000 Ohm |
| TEMPERATURE | Multi |
| MODEL | FLUKE-726/APAC/EMEA |
| BRAND |
Specification
Specifications: Fluke 726 Precision Multifunction Calibrators
| Measurement Accuracy | ||
| Voltage DC | 30.000 V | 0.01% + 2 mV (upper display) |
| 20.000 V | 0.01% + 2 mV (lower display) | |
| 90.00 mV | 0.01% + 10 μV | |
| -10.00 mV to 75.00 mV | 0.025% + 1 count (via TC connector) | |
| Current DC | 24.000 mA | 0.01%+ 2 mA |
| Resistance | 0.0 to 4000.0 Ω | ± 0.015% |
| Frequency | 2.0 to 1000.0 CPM | 0.05% + 0.1 cpm |
| 1.0 to 1000.0 Hz | 0.05% + 0.1 Hz | |
| 1.00 to 15.00 kHz | 0.05% + 0.01 kHz | |
| Sensitivity | 1 V peak-to-peak-minimum | |
| Pressure | Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure. | |
| Source Accuracy | ||
| Voltage DC | 100.00 mV | 0.01% + 10 μV |
| 20.000 V | 0.01% + 2 mV | |
| -10.00 mV to 75.00 mV | 0.025% + 1 count (via TC connector) | |
| Current DC | 24.000 mA (Source) | 0.01% + 2 μA |
| 24.000 mA (Simulate) | 0.01% + 2 μA | |
| Resistance | Range, accuracy (percent of reading + floor) and excitation current | 5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5 mA |
| 5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3 mA | ||
| 400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA | ||
| 1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA | ||
| Frequency | 2.0 to 1000.0 CPM | 0.05% |
| 1.0 to 1000.0 Hz | 0.05% | |
| 1.0 to 10.0 kHz | 0.25% | |
| 10.0 to 15.0 kHz | 0.5% | |
| Waveform | 5 V p-p squarewave, -0.1 V offset | |
| RTDs and Thermocouples | ||
| Measure and source accuracy | Cu10 | 1.8°C |
| NI-120 | 0.15°C | |
| PT-100 (385) | 0.45°C | |
| PT-100 (392) | 0.35°C | |
| PT-100 (391-JIS) | 0.35°C | |
| PT-200 (385) | 0.95°C | |
| PT-500 (385) | 0.55°C | |
| PT-1000 (385) | 0.35°C | |
| RTD Resolution | 0.01°C (0.01°F) | |
| Cu10.01 C | 0.1°C (0.1°F) | |
| J | 0.4°C | |
| K | 0.5°C | |
| T | 0.4°C | |
| E | 0.4°C | |
| R | 1.4°C | |
| S | 1.4°C | |
| B | 1.4°C | |
| L | 0.45°C | |
| U | 0.45°C | |
| N | 0.6°C | |
| XK | 0.4°C | |
| BP | 1.1°C | |
| TC Resolution | J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F | |
| Specifications | ||
| Ramp functions | Source functions | Voltage, current, resistance, frequency, temperature |
| Ramps | Slow ramp, Fast ramp, 25% step-ramp | |
| Loop power function | Voltage | 24 V |
| Accuracy | 10% | |
| Maximum current | 22 mA, short circuit protected | |
| Step functions | Source functions | Voltage, current, resistance, frequency, temperature |
| Steps | 25% of range, 100% of range | |
| Environmental Specifications | ||
| Operating temperature | -10°C to +55°C | |
| Storage temperature | -20°C to +71°C | |
| Operating altitude | 3000 m | |
| Safety Specifications | ||
| Agency approvals | EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 | |
| Mechanical and General Specifications | ||
| Size | 200 x 96 x 47 mm (7.9 x 3.8 x 1.9 in) | |
| Weight | 650 g (23 oz) | |
| Batteries | 4 AA alkaline batteries | |
| Battery replacement | Separate battery compartment, accessible without breaking calibration seal | |
| Side port connections | Pressure module connector, also used for remote real-time programming | |
Download
Related products
Out of stock
2 left in stock
Reviews
There are no reviews yet.